In this article, we will introduce Durkan device and its application. Durkan device is one of the devices that has entered the Iranian market for several years. With the entry of MDF into the market, the use of this series of devices has become mandatory. It should be noted that the remover (panel bar) is not only for MDF work and carpenters should not be unaware of the importance and efficiency of the remover in the wood industry.
Removing machine is a powerful and accurate tool for cutting all types of sheets (MDF, HDF, chipboard, wood) and wood. The structure of this machine is designed in such a way that by moving the remote control rail, the workpiece moves to the main saw of the machine and the cutting process takes place. In workshops and companies producing wooden products, the remote control machine is the most widely used cutting machine. The cutting machine cuts with a saw blade. Due to the simple and accurate operation of this machine, its easy operation and low depreciation, Durkan has played a significant role in the wood industry from the distant past and has been considered as one of the most widely used machines in the wood industry.
Remote device components and its application
Rail
The movement of the remote control rail on the chassis of the device is one of the most important factors involved in the performance of this machine. Altendorf invented the wagon rail and monopolized it for many years. Wagon rails have a lifetime warranty
.In this system, the movement is done by wheels such as train wheels on rails with elliptical cross section. Vibration-free movement makes this rail the most popular and efficient rail in remote machines
Other bearings use bearings or roller bearings. Due to the difference in the alloys between the rail and the machine ball, one of the components corrodes and causes the rail to loosen. This has a detrimental effect on the movement of the rails and the quality of the product produced by this device is reduced
Electric motor
The cutting motor transmits the power required by the saw to cut through the belt. According to Foley with different diameters, different powers can be produced for the cutting process
Main saw and line saw unit: Due to the different designs that are produced, they can move in different directions at an angle. Different movement systems of the saw unit affect the quality of Persian cutting in Durkan. It should be noted that in the case of angular cutting, the remote control female line is inactive
How to move and stabilize the saw unit at an angle causes different qualities in the cut workpiece. Durban Roland uses its proprietary system in this field. Altendorf remote controllers have an exclusive system in the saw unit displacement system that has the most accurate movement and therefore after cutting, a unique quality is observed in the workpiece.
The sack behind the saw
In addition to cutting straight, the cutting machine also has the ability to cut at angles between 90 and 45 degrees
The sack of the remote table
Low production quality binoculars are always weak in terms of angle cutting and this weakness can not be eliminated. One of the most important factors that differentiate remote controllers is the structure and chassis of this device. Having a strong structure always keeps other components in place in the most optimal position and increases the quality of the product.
The main engine
The main motor rotates the saw blade and performs the cutting operation
Rail device
The machine rail is the location of the workpiece to move for cutting. The rails have a variety of technologies for movement, the best of which is the wagon rail invented by the German company Altendorf.
The table behind Gonia
The table behind the saw is where the workpiece is stored
Gonia (behind the saw, front)
By placing the goni on the table behind the gonia, the workpiece can be sized on it
Sheet holder
It is a tool that fixes the workpiece on the rail, which maintains the safety of the operator during cutting.
Front cutting table
Used to cut the workpiece for cutting into larger pieces
The middle sack of the rail
The above are the main components, but in some remotes, there is an operator panel, an extra saw hold, a laser unit, and option as options.This goniometer can be used for cutting in a triangle (at an angle)