Equipped with SERVO DRIVE system for automatic adjustment of the back of the saw.
Equipped with saw collector hood at the top and bottom of the saw.
Possibility to install telescopic goniometer with angular capability.
:General specifications of the device
Ability to adjust the height and angle of the saw and the female line electrically.
Has a separate sack for angled cuts with the ability to easily change the position of equipped with a double V rail with precise, smooth movement and desired angles.
Equipped with rail v precise movement, smooth and without looseness.
Equipped with a separate control panel with a 7-inch display and in line with the operator’s vision.
The 3200 PS is a fully professional ROBLAND remote control. In this model, the new design of the saw unit makes it possible to install a saw blade up to a drop of 45 mm. Also, the adjustments of the saw blade up and down and its angularity are done electrically and its values can be seen in the display of the machine. In this model, the back of the saw is also controlled automatically through the panel of the machine.
:Technical specifications of the device
|Sliding rail length (mm)||3200|
|Main saw blade diameter (mm)||220-450|
|Female line saw diameter (mm)||125|
|Maximum saw blade height 90 ° (mm)||150|
|Maximum saw blade height at 45 ° (mm)||108|
|Telescopic goniometer size (mm)||3200|
|Gunia size behind the saw (millimeter)||1525|
|Engine power behind the main saw (horsepower)||7.5|
|Main saw with 3 variable revolutions (revolutions per minute)||3000/4000/5000|
|Approximate weight of the device (kg)||1200|