- Fully welded integrated chassis with Double Frame design without the slightest vibration made of industrial profiles
Complete head cover with high safety for the operator
Separate operator control panel
Dimensions of the table 195 × 390 cm
Motor servo drive system with very high accuracy
Diagonal shoulder teeth on the x and y axes and wing screw on the z axis
Delta servomotors
Speed of x and y axis up to 70 and z axis up to 20 meters per minute
Z axis axis, 25 cm
9 kW HSD spindle Italy
10-digit linear tool replacement system
Central lubrication system
Automatic tool length detection sensor
Workpiece thickness detection sensor
Equipped with pneumatic bag for zero points of the table with connection to the main chassis
Equipped with a vacuum pump of 300 cubic meters of oil
Proportional distribution of vacuum on the table surface with 12 suction points
Radonix controller
Intelligent troubleshooting system
Ability to transfer and execute files from all design software such as AutoCAD, Corel, Artcom, Rhino and
Equipped with device performance simulation software
- Increase the zero points of the work table to 4
Aluminum table
Combined vacuum and grooved table
Drilling head with 9 vertical drills and 6 horizontal drills
The fourth axis (C Axis)
24-digit tool replacement system
Automatic system for selecting vacuum areas
Automatic bag detection system to prevent collisions with tools (Stop Monitoring)
Fourth axis (rotary)
Vacuum pump 500 cubic meters
- Maximum working dimensions of unlimited length, width up to 950 mm and thickness up to 50 mm
Drilling head equipped with 9 vertical drills, 6 horizontal drills and a saw blade
Axis speed x and y up to 70 meters per minute and axis z up to 20 meters per minute
Diagonal toothed tooth at x and y axis and ball screw at z axis
Servo motor drive system with very high accuracy
Italian controller
- 5.5 kW air-cooled milling machine
4-digit automatic linear tool replacement system
Workpiece length detection sensor
Ball cushion table for easy movement of the workpiece
Central or automatic lubrication system
- Dimensions up to 3000 mm long and 300 mm thick and with unlimited width (any other dimensions are produced to customer order)
Spindle 6.5 kW HSD Italy
Comb toothed system for x-axis and wing screw and for z and y axes
The speed of the x axis is up to 40 meters per minute and the y and z axes are up to 25 meters per minute
Serve Delta drives with very high accuracy
Four pneumatic clamps
Ability to run designs from autocad, corel, powermill and software
Pneumatic bag
Fourth axis (rotary)
- Increase mechanical zero points
Increase the number of pneumatic clamps
Automatic lubrication system
Automatic tool replacement system with 6 tool bays
Vacuum grooved composite table
Rail and wagon system for moving the element chamber
Dimensions of the table are 125 × 280 cm
Manual and automatic device control system
1200 watt main heaters and 1500 watt side heaters
Pneumatic frame
Pressure control system
Anti-wrinkle system
Vacuum pump 100 cubic meters of oil
Two-digit roll holder
- Vacuum pump 150 cubic meters dry
PLC control system
Aluminum floor plate
Mirror steel in the element housing
Magnetic supports under the workpiece
